power entry modules without line filter CMF2, cmf5 www.schurter.com/pg0 5 connectors iec appliance inlet c8 polarized with line switch 1-pole CMF2 c8 polarized 70 c description - panel mount: screw-on mounting on pcb, from top or bottom - 2 functions: appliance inlet protection class ii, line switch 1-pole - for pcb mounting - alternative: unpolarized version or protection class i cmf1, cmf 4 ; cmf3, cmf 6 characteristics - easy mounting with center bolt and snapper or srewed on pcb or housing - electrical connection done on the pcb - bi-positioning of the switch from left or right side, standard cmf with switch on right side - with or without rear-side insulation cover - qualified for use in equipment according iec/en 60950 other versions on request - line switch with other rocker marking - line switch on left of inlet references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 2.5 a / 250 vac; 50 hz ratings ul/csa 6 a / 125 vac; 60 hz dielectric strength > 2.3 kvac between l-n > 2.8 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 2 acc. to iec 61140 terminal pcb 1.6 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c8p following iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 2.5 a, protection class 2 line switch rocker switch 1-pole, non-illuminated, acc. to iec 61058-1 technical detail s
2 power entry modules without line filter CMF2, cmf5 www.schurter.com/pg0 5 connectors dimensions 53.3 mm 24.3 22.3 19 2 53.3 26.65 26.65 2.3 2.3 0.9 r 3 1.3 2.4 6.16 10 0.8 8 r 1 1.05 4 2.8 18 9 1.6 2.8 8.6 18.45 7 8.15 4.15 10.2 n l 3 8.25 45 25.75 27.55 0.8 3 4 3 11 0 -0.1 0.1 with insulation cover the size of the mounting cut-out can be selected as required. fixation on pcb or housing from below 11 14.3 9 1.6 0.1 0.13 1) m3x12 1) self tapping screw fixation on pcb or housing from above 11 5.9 1) m3x12 4.2 9 13 13.4 +0.30 +0.15 0.05 0 - 0.1 1) self tapping screw drilling diagrams cmf1 and CMF2 (c8) 11 6.16 5.3 3 10 45 0.1 10.2 8.6 8.25 7 1.6 3 1.6 d1 3.2 21.6 23.4 28.05 29.85 +0.1 0 +0.1 0 variants connectors mounting side cover ground terminal ground terminal direction order number c8p from below - - CMF2.1031.12 c8p from below l - - CMF2.1131.12 c8p from top - - CMF2.1011.12 c8p from top l - - CMF2.1111.12 packaging unit 50 pcs
power entry modules without line filter CMF2, cmf5 www.schurter.com/pg0 5 connectors mating outlets/connector s category / description power supply or interconnection cord overview complet e divers power supply and interconnection cords 2.5 a cs02.0221.15 0 power supply or interconnection cord further types to CMF2, cmf 5 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
